Imperx LYNX User Manual page 145

3.8.16.9 Set Double Exposure (
The
'sde'
trigger event when the trigger is in the 'double' mode. The first frame
after a trigger will be exposed for the length of time specified. All
subsequent frames will be exposed per the shutter setting ( set by the
command ).
'sst'
Syntax:
Parameter:
Range:
Example:
Notes:
3.8.16.10 Get Double Exposure (
The
'gde'
Syntax:
Response:
Example:
LYNX Hardware User's Manual
)
'sde'
command sets the exposure time for the first frame after a
sde <i>
The exposure time in units of uSeconds.
i
min=1, max=65,535
i
Sets the double exposure to 400 uSeconds.
sde 400
The double exposure operates in increments of 1
uSecond.
)
'gde'
command returns the current double exposure setting.
gde
i
User enters command.
gde
Camera responds with current setting.
400
145 of 216