Table of Contents
Advertisement
DC Terminal Block Power Inputs: There are two pairs of
power inputs can be used to power up this Switch.
Redundant power supplies function is supported. You only
need to have one power input connected to run the Switch.
The
10/100BaseT/TX
1. The
10/100BaseT/TX
The following lists the pinouts of
Pin
Regular Ports
1
Input Receive Data +
2
Input Receive Data -
3
Output Transmit Data +
4
NC
5
NC
6
Output Transmit Data -
7
NC
8
NC
2. The
100BaseFX
The fiber port pinouts: The Tx (transmit) port of device I is
connected to the Rx (receive) port of device II, and the Rx
(receive) port of device I to the Tx (transmit) port of device II.
and
100BaseFX
Connections
10/100BaseT/TX
Connections
3
Hardened Ethernet Switch
Connectors
Uplink port
Output Transmit Data +
Output Transmit Data -
Input Receive Data +
NC
NC
Input Receive Data -
NC
NC
ports.
Advertisement
Table of Contents
