Cabling - SignaMax 065-7405TB User Manual

Cabling

Step 1: First, ensure the power of the switch and end devices are turned off.
Always ensure that the power is off before any installation.
<Note>
Step 2: Prepare cable with corresponding connectors for each type of port
in use.
Step 3: Consult the previous section for cabling requirements based on
connectors and speed.
Step 4: Connect one end of the cable to the switch and the other end to a
desired device.
Step 5: Once the connections between two end devices are made
successfully, turn on the power and the switch is operational.
Hardened Ethernet Switch
19