Yamaha YSP-300 Owner's Manual page 62

_-_J_I-'I'IIi'I'IiPI-'I'I'IiI'
You can enjoy analog audio signals output from your TV
in real surround sound.
?_t..
Before performing the steps below, set the volume of this unit to
30. If necessary, adjust the volume level ill step 4 below.
4
If you hear sound from your TV speakers,
reduce the volume level of your TV until you
can no longer hear any audio being output.
To reduce the TV volume level, use the remote
control supplied with your TV.
5 Press VOLUME +/- to adjust the volume
level.
VOLUME
U.S.A. and Canada models)
Press SUR. DECODE repeatedly (or press
SUR. DECODE and then press <1/ _) to
switch between surround modes.
Signals input from 2-channel sources are played back
in multi-channels.
For more information on surround modes, see
page 56.
SUR. DECODE
Select the TV channel you want to watch.
To select a TV channel,
use the remote control
supplied with your TV.
2 Set the operation mode selector to YSP.
SUR. DECODE
or
Press TV.
This unit outputs audio signals from your TV.
58 En