Yamaha YSP-300 Owner's Manual page 18

@ DVD playerNCR control buttons
Control your DVD player or VCR (see pages 98 and 99).
@ My Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page 61 ).
@ TV POWER
Turns on the power of your TV or sets it to the standby
mode (see page 97).
AV POWER
Turns on the power of the selected component or sets it to
the standby mode (see pages 98 and 99).
@ INPUT1
Switches the input source on your TV (see page 97).
@ MACRO
Use to set the TV macro (see page 100).
@ WA
Switches the preset station number (1 to 8) when this unit
is receiving an FM broadcast or XM channel (see
page 52).
CAT
Switches the preset station group (A to E) when this unit is
receiving an FM broadcast or XM channel (see page 52).
@ SLEEP
Sets the sleep timer (see page 68).
@ INPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page 87).
Beam mode buttons
Change the beam mode settings (see pages 54, 60, and
61).
@ SUR. DECODE
Selects the surround mode for playback (see page 57).
MENU
Displays the setup menu on your TV monitor (see
pages 37 and 73).
@ Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other AV components.
RETURN
Selects sleep timer settings or returns to the previous SET
MENU screen,
TV VOL +/-
Adjusts the volume level of your TV (see page 97).
@ CH +/-
Changes the channels of your TV, digital satellite tuner,
cable TV tuner, or VCR (see pages 97 and 99).
@ TV MUTE, CODE SET
Mutes the audio output of your TV (see page 97).
Sets up remote control codes (see page 96).
The functions @ and @ are available only when the FM/XM
stations are preset.
14
En