Yamaha YSP-300 Owner's Manual page 31

"PIIIII:P'I(I'III"
If your component supports optical digital connections, connect the optical digital output jack on your component
(e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL INPUT jack on this unit. If your component does not
support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL
DIGITAL INPUT jack on this unit.
If your component does not support any digital connections, connect the analog audio output jacks on your component
(e.g., VCR) to the AUX 1 AUDIO INPUT jacks on this unit.
_.,_,._
To prevent the optical cable from being unplugged, affix the optical cable ill the supplied cable clamp (see page 20).
If you make analog and digital audio connections at the same time as shown ill the illustration below, the digital audio signals input at
the AUX 1OPTICAL DIGITAL INPUT o1"AUX 2 COAXIAL DIGITAL INPUT jack take priority over the analog audio signals input
at the AUX 1 AUDIO INPUT jacks.
Rear panel of this unit
(U.S.A. and Canada models
)ANTE NNA ]
r-1
DOCK
- AUDIO INPUT T" OUT7
Auxl I TWSTB I su_w00 q
F DIGITAL INPUT =
UX 2 DVD
I _AUX 1 TV/STB
I "® "® ®
| Analog Optical Coaxial
audio digital digital
output output output
"4 J
[] ®
X[vl IB IN
Video signal to the TV
DVD player/recorder, VCR,
game console, CD player, etc.
Audio pin cable
Optical cable
Digital audio pin cable
27
En