Yamaha YSP-300 Owner's Manual page 37

_ll_m,_l=l_lr-
The following diagram illustrates the overall flow of the setup procedure.
Run LANGUAGE SETUP.
See "Changing OSD language" on page 34.
Run AUTO SETUP (IntelliBeam).
See "AUTO SETUP (IntelliBeam)" on page 35.
If an error occurs
Look for a remedy.
See "Error messages for AUTO SETUP" on page 41 for a complete list of error
messages and possible remedies.
Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
See "Playback" on page 45, "Enjoying surround sound" on page 54, and "Using sound field programs" on
page 63.
If you want to make additional settings
and adjustments
Run MANUAL SETUP.
See "MANUAL SETUP" on page 72.
--'4'--
• If you cannot clearly hear a sound beam from a specific channel, adjust settings for
SETTING PARAMETERS (see page 74) or for BEAM ADJUSTMENT (see page 75) in
BEAM MENU.
• ff there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 77).
33
En