Yamaha YSP-300 Owner's Manual page 35

• _flpl.,_.l,¢: :, -
2 Press STANDBY/ON again to set this unit to
the standby mode.
When this unit is ill the standby mode, only STANDBY/ON on
the front panel or on the remote control is operational, and the
other control buttons on the fl'ont panel or on the remote control
are not operational until the power of this unit is turned on.
(U.S.A. and Canada models
Press STANDBY/ON to turn on the power of
this unit.
The volume level appears in the front panel display,
and the current input source and beam mode are
displayed.
Front panel
or
STANDBY/ON
Remote control
J
Current volume level
,i
Current input
source
[ i'i" 2) ur';
Current beam
mode
VOL
31
En