Yamaha YSP-300 Owner's Manual page 17

-"i'_'J[i_t-'It II |' |I 'If I"I( I'll I"
This section describes the functions of the remote control
used to control this unit. Some buttons marked with an
asterisk (*) share the common functions between the YSP
and TV/AV operation modes (@).
You can also control other components using the remote control
once you set the appropriate remote control codes. See
"Controlling other components" on page 97 for details.
L_ 49
SUR.D_COD_;
Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
@ STANDBY/ON
Sets this system to the standby mode (see page 31 ).
@ Transmission indicator
Lights up when infrared control signals are being output.
@ Input selector buttons
Use to select an input source (DVD, AUXI, AUX2,
AUX31DOCK, STB, TV, or FM/XM).
@ VOk MODE
Turns on or off the volume modes (see page 67).
@ AUTO SETUP
Enters the AUTO SETUP menu (see page 35).
Sound field program buttons
Select the sound field programs (see page 63).
@ ENHANCER
Turns on or off the Music Enhancer (see page 66).
Cursor buttons A / _ / _ / _, ENTER
Select and adjust SET MENU items.
DISPLAY
Displays information on the selected input signal.
@ VOLUME +/-
Increasesor decreases the volume level of this unit (see
page 47).
MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level (see page 47).
@ TV INPUT
Toggles between the input source on your TV (see
page 97).
@ CH LEVEL
Adjusts the volume level of each channel (see page 85).
TEST
Outputs a test tone when adjusting the output level of each
channel (see page 84).
13 En