Quick Start Guide - Quadra-Fire MTVERNINSAE-MBK Owner's Manual Operation & Care

F. Quick Start Guide
Any button pressed will turn on the backlight. Wall control will automati-
NOTICE:
cally revert back to the starting screen if there is no activity for 15 seconds; except
for the "CONFIRM FUEL CHANGE" screen.
Buttons
Up
Down
Wall Control for Reference
Function Buttons
TURNING ON APPLIANCE
12:30 PM
READY
71
Set at: 68
MENU
HEAT OUTPUT
1. At the starting screen, press "MENU".
MENU
Set Comfort Level
Auto/Manual/Off
Fuel Type
User Settings
2. Highlight "AUTO/MANUAL/OFF".
Press "SELECT".
AUTO/MANUAL SETTINGS
Automatic
Manual
Manual
Off
3. Highlight "MANUAL". Press "SELECT
4. Press "DONE" twice or wait 15 sec-
onds for starting screen to re-ap-
pear.
January 29, 2014
CHOOSING FUEL TYPE
READY
71
MENU
HEAT OUTPUT
1. At the starting screen, press "MENU"
button once or twice until "MENU"
screen appears.
MENU
Set Comfort Level
Auto/Manual/Off
Fuel Type
User Settings
2. Highlight "FUEL TYPE" using the "UP/
DOWN" buttons to the right side of the
display. Press "SELECT".
FUEL SELECTION
Softwood Pellet
Sunflower Seeds
Wheat
Hardwood Pellet
3. Scroll down and highlight "HARD-
WOOD PELLET" or your fuel type.
4. Now press "SELECT" to choose new
fuel.
CONFIRM FUEL CHANGE
Please empty hopper
of old fuel type and
ensure firebox is clean.
Please refer to
section 8 in manual.
DONE
".
5. Press "DONE" to confirm fuel
change.
6. Press "DONE" twice or wait 15 sec-
onds for starting screen to reappear.
7. Fill the hopper with fuel. If the hopper
was completely empty or has run out
of fuel, put approximately 1/2 cup of
pellets into the firepot for a quick re-
start.
8. Be sure the hopper lid and glass
door are both closed.
7036-187
CHOOSING TEMP UNIT:
12:30 PM
Set at: 68
1. At the starting screen, press "MENU"
button once or twice until "MENU"
screen appears.
2. Highlight "USER SETTINGS" using
the "UP/DOWN" buttons to the right
side of the display. Press "SELECT".
3. Highlight "TEMP UNITS F/C" using the
"UP/DOWN" buttons to the right side of
the display. Press "SELECT".
4. Press the "UP" or "DOWN" button
to set desired temperature unit and
press "SELECT"..
5. Press "DONE" twice again, or wait 15
seconds for starting screen to re-ap-
pear.
MT. VERNON AE INSERT
°F or °C
READY 12:30 PM
71
Set at: 68
MENU
HEAT OUTPUT
MENU
Set Comfort Level
Auto/Manual/Off
Fuel Type
User Settings
USER SETTINGS
Temp Units F/C
Flame Height Adjust
Temp Differential
19