Quick Start Guide - Quadra-Fire 5700 STEP TOP ACC Owner's Manual

5700 STEP TOP ACC
C. Quick Start Guide
Note: These are generic drawings and may not represent your specific model.
ITEMS NEEDED FOR FIRST FIRE:
OPEN AIR CONTROLS
HIGH
BURN RATE
CONTROL
(Upper Right
Corner)
AUTOMATIC
COMBUSTION
CONTROL (ACC)
(Middle right hand side)
ADD KINDLING
LIGHT THE PAPER
ADD MORE WOOD
6
10 Pieces of Newspaper, 10-20 Pieces of Dry Kindling
and a Few Pieces of Dry Split Wood.
LOAD WOOD
HIGH
1
4
6
2
REDUCE AIR
CONTROL
Set to desired heat output
LOW
BURN RATE
CONTROL
(Upper Right
Corner)
LOW
AUTOMATIC
7
COMBUSTION
CONTROL (ACC)
(Middle right hand side)
7038-207G
ADD NEWSPAPER
WARNING! Risk of Fire
Close and securely latch the door after
the fire has started, and after refueling, to
prevent:
• Spillage of smoke, flame and carbon
monoxide
• Spillage of sparks, coals and logs
• Over-firing
DO NOT leave the appliance unattended
with the door open.
Starting a fire may not require an open
door for draft. The air control should
supply adequate draft.
The appliance is ready for
normal operation.
September 28, 2016
3
5