How To Use The Remote Control And On-Screen Menu - Cisco MX200 Getting Started Manual

Cisco TelePresence Systems
GettinG started Guide
Table of contents Introduction
How to use the remote control and
on-screen menu
When you pick up the remote control and touch the rubber
line sensors along its sides, the system wakes up.
Point the remote control towards the system or camera and
press the Home key ( ) to open the top level menu.
Navigating the menu
Using the remote control to navigate the menu:
• Use the arrows down/up to select a menu item.
• Use the arrow right to expand the selection.
• Use the arrow left to go back one step.
Changing settings
Using the remote control to change a value:
• Select a value from a drop down list and press the
OK ( ) key to save, or press the left arrow key
without saving.
• Enter a value/text in a value/text input field. Navigate to
Save and press OK ( ) to save the change, or navigate to
Cancel and press OK ( ) to leave without saving.
You can find more information about the on‑screen menu in
the On‑screen menu system appendix.
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.
User interfaces User interfaces Configuration
Call
Presentation
Camera control
Settings
Layout
Main source: Camera
Call settings
Languages
to leave
Date and time
Sounds and alerts
Wallpaper: Custom
System information
Administrator settings
Restart
Appendices
HOME
Arrow up/down
Press the up
down
navigate in the menu.
Arrow left
Press the
left arrow key
SETTINGS
to go one step
back in the menu
or to move to the
left in a text field.
ADMINISTRATOR SETTINGS
Programmable softbuttons
Connect to Cisco Callway
IP settings
Set menu password
Pairing
Advanced configuration
and
arrow keys to
Arrow right
right
to expand the
selected menu
item or to move
to the right in a
Press the OK/Select
confirm your choice or selection.
9
Press the
arrow key
text field.
OK/Select
key ( ) to
www.cisco.com