User Interfaces - Cisco MX200 Getting Started Manual

Cisco TelePresence Systems
GettinG started Guide
Table of contents Introduction
User interfaces
The principal operating device for your Cisco TelePresence
video conference system is either a remote control or a Touch
controller.
Additionally, you can configure your system via its web
interface, provided that it is already connected to a network
and has got an IP address.
In this chapter, we show how to use the Touch controller, how
to use the remote control and on‑screen menu, and how to
navigate and use the web interface.
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.

User interfaces

User interfaces Configuration
Touch controller
Web interface
Appendices
Remote control and
on-screen menu
7
www.cisco.com