Advertisement
7000DX FRONT VACUUM/DeBRIs FIlTeR HOse
HOOK UP
Attach the hose with the 1.5" Cuff-Lynx™ reducer to the onboard
debris filter. Attach other end of same hose to wand tube.
7000DX DUAl CORDs
Top cord: Powers Vac 1 & Pump.
Bottom cord: Powers Vac 2.
Plug each power cord into a separate, 20A grounded wall outlet.
Outlets must be on two separate breakers. When the amber
light on the switch plate illuminates, the machine is on separate
circuits (not necessarily 20A circuits). You can identify the primary
cord by the yellow tag.
7000DX BACK VACUUM HOse/AUTO PUMP-OUT
Attach the second hose bearing cam lock to the Auto Pump-out
fitting. Secure the hose to the fitting using the cam lock. Push the
hose cuff onto the fitting, making sure the silver ears and rings are
extended forward. Pull the ears down using the rings until con-
nection is tight. Place the end of the hose in a location where dirty
water can drain.
Yellow tag
indicates primary
cord.
Three switches are located on the lower left side of the machine.
To use either vacuum, turn on the Vacuum switch 1 or 2. To use
the pump, turn on the Pump switch.
3
7000DX FlOOD HOg
HOOK UP
7000DX sWITCHes
Advertisement
