Click SUA/NAT to open the SUA Server screen.
Refer to
Table 29 on page 114
Figure 48 SUA/NAT Setup
The following table describes the labels in this screen.
Table 30 SUA/NAT Setup
LABEL
Default Server
#
Active
Name
Start Port
Chapter 10 Network Address Translation (NAT) Screens
for port numbers commonly used for particular services.
DESCRIPTION
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen.
If you do not assign a Default Server IP Address, the Prestige discards all packets
received for ports that are not specified in this screen or remote management.
Number of an individual SUA server entry.
Select this check box to enable the SUA server entry. Clear this check box to
disallow forwarding of these ports to an inside server without having to delete the
entry.
Enter a name to identify this port-forwarding rule.
Type a port number in this field.
To forward only one port, type the port number again in the End Port field.
To forward a series of ports, type the start port number here and the end port
number in the End Port field.
Prestige 2302R Series User's Guide
115