General Safety And Installation Precautions; Things You Need For Installation - Mastervolt Sunmaster XS4300 User And Installation Manual

BEFORE YOU START
3.9 GENERAL SAFETY AND INSTALLATION
PRECAUTIONS
WARNING
Be sure that all wiring is disconnected from
any power
installation.
CAUTION!
•
Short circuiting or reversing polarity may
lead to damage to the Sunmaster, the
cabling and/or the terminal connections.
•
Follow all
instructions in order of succession as
described.
•
The DC switch, if installed, must stay in
the OFF-position
installation.
10
source during the entire
steps of the installation
during the entire

3.10 THINGS YOU NEED FOR INSTALLATION

Make sure you have all the parts you need to install the
Sunmaster:
•
The Sunmaster + mounting bracket (included).
•
Four screws (with plugs) to mount the Sunmaster.
Maximum diameter: 5 mm. Use mounting materials
which are suitable to carry the weight of the Sunmaster
•
Phillips screwdriver nr. 2 to open the connection
compartment of the Sunmaster.
•
Flat blade screw driver.
•
Masterbus communication cables.
•
RS485 communication cables.
November 2008 / Sunmaster XS4300-3200-2000 / EN