Adjustments; Camera Section Adjustment; Preparations Before Adjustment; List Of Service Tools - Sony Handycam CCD-TR86 Service Manual

CCD-TR501E/TR502E/TR503E/TR506E/TR620E/TR720E/TR740E(PAL)
When performing adjustments, refer to the layout diagrams
for adjustment related parts beginning from page 6-34.
NT : NTSC MODEL
PAL : PAL MODEL
WIDE : WIDE (16 : 9) MODEL
DZ : DIGITAL ZOOM TYPE
MO : MONO MODEL

6-1. CAMERA SECTION ADJUSTMENT

1-1.

PREPARATIONS BEFORE ADJUSTMENT

1-1-1.

List of service tools

Oscilloscope
Adjustment screw driver
Ref. No.
J-1 Filter for color temperature correction (C14)
J-2 ND filter 1.0
ND filter 0.3
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
J-5 Siemens star
J-6 Adjustment remote commander (RM-95 upgraded) Note
J-7 Multi CPC
J-8 Measuring pin tool for viewfinder
J-9 IR receiving jig
J-1 J-2
J-6 J-7
CCD-TR86/TR96/TR506/TR506PK/TR507/TR916(NTSC)
SECTION 6

ADJUSTMENTS

Regulated power supply
Color monitor
Name
J-6080-058-A
J-6080-808-A
J-6080-818-A
J-6082-200-A
J-6020-250-A
J-6080-875-A
J-6082-053-B
J-6082-311-A
J-6082-192-A
J-6082-383-A
J-3
J-8
ST : STEREO MODEL
V. LIGHT : VIDEO LIGHT TYPE
IR : INFRARED RADIATION TYPE
S. SHOT : STEADY SHOT MODEL
Vectorscope
Digital voltmeter
Parts Code
Auto white balance adjustment/check
White balance adjustment/check
White balance check
White balance check
For checking the flange back
For video section adjustment (VC-188 board CN102)
For adjusting the viewfinder
For IR section adjustment
Note: If the microprocessor IC in the adjusting remote commander
is not the new microprocessor (UPD7503G-C56-12), the
pages cannot be switched.
In this case, replace with the new microprocessor (8-759-
148-35).
J-4
J-9
Fig.6-1-1.
6-1
Pattern generator
Usage
J-5