Ice Shelf; Door Features; Door Retainer; Door Bins - KitchenAid Bottom-Freezer Refrigerator Use And Care Manual

Lower basket divider
The lower basket divider is designed to be non-removable and it
should remain in the refrigerator.

Ice Shelf

(on some models)
To install and remove ice shelf:
1. Slide rear L-shaped groove of shelf down over rear wall
screw. Push rack back until screw is stopped in L-shaped
groove.
2. Place front groove over front wall screw and push down until
shelf is secured.
3. To remove, perform above steps in reverse order.
18

DOOR FEATURES

Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory." Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the cover or in the "Assistance or
Service" section.

Door Retainer

To remove and replace the door retainer:
1. Remove the retainer by lifting it up and pulling it straight out.
2. Replace the retainer by sliding it in above the support and
pushing it down until it stops.

Door Bins

To remove and replace the bins:
1. Remove the bin by lifting it up and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.

Utility Compartment

(on some models)
To remove and replace the utility compartment:
1. Remove the utility compartment by lifting it up and pulling it
straight out.
2. Replace the utility compartment by sliding it in above the
desired support and pushing it down until it stops.