Making An Outgoing Call; Answering An Incoming Call; Rejecting An Incoming Call; Volume Control - Advent ADVUNI300 Operating Instructions Manual

Making an Outgoing Call

Outgoing calls can be perfor ed in two anners. The outgoing call can be direct
dialed using the front panel ke pad or the b touching either the Phonebook or
Call Histor icons, selecting a na e and touching the phone nu ber.
Direct Dialing:
1. Press the front panel MENU button and then touch the BLUETOOTH icon to
access the Bluetooth® ain enu. The following screen will appear:
2. Use the 0-9, */+, and # icons to input the phone nu ber. If necessar touch the
green arrow icon to clear the last digit or the entire nu ber and start over.
3. After entering the phone nu ber, touch the
nu ber dialed will be displa ed on the screen.
4. To end the call, touch the

Answering an Incoming Call

To answer an inco ing call touch the
clearl into the units icrophone. To end the conversation, touch the

Rejecting an Incoming Call

Touch the Transfer to Phone icon to reject an inco ing call. The call will revert to
our obile phone and be left for voice ail.

Volume Control

To increase or decrease the volu e level of an inco ing call, turn the rotar knob
on the front panel or press the VOL+/ VOL- icons on the re ote control.
64
Bluetooth Direct Dial Screen
icon.
icon. For best reception, speak loudl and
ADVUNI300
icon to dial the call. The
icon.