Managing Incoming Calls - Advent ADVUNI300 Operating Instructions Manual

ADVUNI300
8. Touch the "Pair" icon on the unit's Bluetooth® user interface screen.
9. A pro pt to pair or bond should appear on our obile phone. Accept the
request and initiate the process.
NOTE: Some mobile phones require a "pass key" or pairing code to connect. If
your phone requires a pass key or pairing code, you will need to enter
this number. The default pairing code for many mobile phones is "0000".
The default code for the unit is "0000".
10. A pro pt to enter a PIN nu ber or passke for the unit should appear. The
default passke for the unit is "0000".
11. At this point a pro pt stating pairing successful should appear. Another
pro pt should appear asking connect to the unit, Yes or NO. Touch Yes. The
obile phone and the unit should connect. The obile phone should displa
a essage si ilar to "Device Connected" and the obile phone and the unit
are now connected. ADVUNI300 will appear on the obile phone list of devices.

Managing Incoming Calls

When connected to a Bluetooth® obile phone, the unit will ute audio output,
pause CD pla , and change to the Bluetooth® screen below when a call is received.
The inco ing phone nu ber or assigned na e for that nu ber will appear on
the screen. An audible tone will sound fro the unit and a graphic displa will
appear on the front panel.
1. icon: Touch to answer an inco ing call.
2. icon: Touch to end an inco ing call.
Bluetooth Incoming Call Screen
63