ZyXEL Communications VES1724-56 User Manual page 83

24-port temperature-hardened vdsl2 box dslam
Hide thumbs Also See for VES1724-56:
Table of Contents

Advertisement

Note: You must configure a VLAN first.
Figure 39 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 15 Basic Setting > IP Setup
LABEL
Domain Name
Server
Default Management Specify which traffic flow (In-Band or Out-of-band) the Switch is to send packets
VES1724-56 User's Guide
DESCRIPTION
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
originating from itself (such as SNMP traps) or packets with unknown source.
Select Out-of-band to have the Switch send the packets to the out-of-band
management port. This means that device(s) connected to the other port(s) do not
receive these packets.
Select In-Band to have the Switch send the packets to all ports except the out-of-band
management port to which connected device(s) do not receive these packets.
Chapter 8 Basic Setting
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ves1724-56b2

Table of Contents