Table of Contents
Advertisement
3-3. Setup – Record Mode
In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below. Navigate through
the menu items using the mouse or the control button on the remote control and change the value of the menu item.
Menu Item
CHANNEL
RESOLUTION
QUALITY
RECORDING
30 |
P a g e
Figure 3.3.1. Recording Mode Setup Screen
Table 3.3.1. Menu Items in Recording Mode Setup
Select a channel for applying the following settings using the mouse or the
control button on the remote control. Press the right square button to change
the setting value of all channels at once. Once you the value has been changed,
select OK to confirm the changes.
(RESOLUTION, FRAME RATE, QUALITY, RECORDING, PRE RECORD and POST
EVENT RECORD)
Analog DVR: Select either CIF, Half D1 and D1 using the mouse or the control
button on the remote control.
HD-SDI DVR: Select either 640 x 360, 1280 x 720, 1920 x 1080 using the mouse
or the control button on the remote control.
Select the recording quality for the specified channel. LEVEL 1 ~ LEVEL 5
(Allows the user to change the recording QUALITY of the selected
CHANNEL)
Assign the recording mode for each channel. Options are: Continuous, By
Motion, By Sensor, By Schedule or Disable.
Description
Advertisement
Table of Contents
