Setup - Display Mode - Nadatel UH-0413L User Manual

3-2. Setup – Display Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control. To return to
the previous setup menu screen, press the ESC button.
Item
OSD
OSD CONTRAST
SEQUENCE
Figure 3.2.1. Display mode setup screen
Table 3.2.1. Menu items in DISPLAY mode setup
Enable/disable on-screen-display.
Set the transparency level of the On Screen Display (OSD) (50~100)
Enable/disable sequential display of video in full screen mode.
Description
20