Table of Contents
Advertisement
PRE RECORD
POST EVENT RECORD
SENSOR RECORDING
AUDIO
SCHEDULE
3-3-1. Recording Schedules
To setup a recording schedule, select SCHEDULE in the RECORD menu. Navigate through the menu items using the
mouse or the control button on the remote control.
[Channel]: Select the specific channel.
[Setup]: Set up using the left button of the mouse to section under the specific day and time. It can set the all section
under the specific day or time at a time when pressing the specific day or time. It is also possible to set up
recording modes of various type using a CONTINUOUS (green), Motion (yellow) and Sensor (red). Left-Click
and drag the mouse to change the schedule for more than one timeslot.
[COPY Schedule]: To copy the schedule setup from one channel to another, select the channel to copy using the
mouse or the buttons on the remote control, and select to channel to copy to and press the select button. Select
OK to confirm the changes.
Enable/disable pre-event recording. Pre-event recording time is 5 seconds to 20
Minutes.
Set the post event recording time duration for the specified channel. (10~60
seconds)
Enable setting up to 4 sensors for the specified channel using the mouse or the
control button of the remote control.
Enable/disable audio recording for the specified channel.
Set the recording schedule. Press SEL to enter the schedule setup screen.
31 |
P a g e
Advertisement
Table of Contents
