Table of Contents
Advertisement
3-2. Setup – Live Mode
Item
OSD
SEQUENCE
SEQ-DWELL TIME
EVENT BEEP
OSD CONTRAST
CHANNEL
DISPLAY
SEQ LIST
BRIGHTNESS
CONTRAST
HUE
SATURATION
VGA SCREEN
MODE
ERROR ALARM
Table 3.2.1. Menu items in LIVE mode setup
Enable/disable on-screen-display.
Enable/disable sequential display of video channels in full screen mode
Dwell time for each cannel display in sequential display mode
Enable/Disable internal beep alert sound.
Set the visibility level of the On Screen Display (OSD)
Select the channel for applying the following settings.
Enable/disable display of the video channel in live display mode
Enable/disable the specified channel to be included in sequential display mode.
Change the brightness value for the specified channel
Change the contrast value for the specified channel
Change the hue value for the specified channel
Change the saturation value for the specified channel
Select VGA screen mode as either FULL or Normal.
NOTE: If the mode is changed, the system will reboot.
Enable/Disable alarm for video loss or HDD fail.
Figure 3.2.1. Live mode setup screen
Description
15
Hide quick links:
Advertisement
Table of Contents
