Internet Connection Using Ddns - Nadatel N-0441U User Manual

Internet Connection Using DDNS

Connect an Ethernet cable (10BASE-T/100BASE-TX CAT 5 LAN Cable) from the system to a router (hub)
1. Go to SETUP>NETWORK. Set NETWORK TYPE as DHCP or LAN and set the DDNS SERVER to ON. And select
ddnscenter.com on DDNS1. (If a different DDNS server is selected, the DVR will not communicate with the
DDNS server)
2. Open the TCP port 5445 and the Web Port 80 in the router. (Refer to A. How to set IP address of the DVR
and open TCP port of the router?)
3. Confirm the Mac address and Serial Number from the DVR. (NOTE: The Mac Address and the Serial Number
of the DVR can be found on the DVR unit's label)
4. Open the web browser and log on http://www.ddnscenter.com
 MAC Address: Input the Mac address of the unit (EX. 0002690XXXXX) without any spaces.
 Serial Number: Input the Serial Number of the unit (EX. N1640Mxxxxxxxxx) without any spaces.
108 | P a g e