Alarm-Out; Spot-Out Setup - Nadatel N-0441U User Manual

3-4-1. ALARM-OUT

Item
ALARM OUT
SENSOR IN
MOTION ON
VIDEO LOSS ON
ALARM DURATION
ERROR ALARM

3-4-2 SPOT-OUT Setup

Item
SPOT ON EVENT
SPOT EVENT
DWELL TIME
SEQUENCE
SEQ-DWEL TIME
SP'OT CHANNEL
34 | P a g e
Figure 3.4.2. ALARM-OUT Setup Screen
Table 3.4.2. Menu Item in ALARM-OUT Setup Screen
Select an Alarm out number.
Available No: 4 CH (1)
Enable Alarm Out by Sensor up to 4 Inputs.
Enable Alarm Out by Camera Motion up to 4 cameras.
Enable Alarm Out by Video Loss up to 4 cameras.
Set the alarm dwell time from 5 to 60 seconds.
Set the error type for the alarm activation. The options are
OFF, ALL, HDD ERROR and VIDEO LOSS.
Figure 3.4.3. SPOT-OUT Setup Screen
Table 3.4.3. Menu item in SPOT-OUT Setup Screen
Enable/Disable display of the channel when an event is active.
Set the dwell time for the display of the event activated channel.
(1-10sec)
Enable/disable sequential display of spot channel in full screen.
If select ON, spot channel selection screen is displayed.
Set the dwell time for the spot channel display.(1-10sec)
Select a channel for spot monitoring using the mouse or the control button on
the remote control and press OK button.
Description
Description