Storage - Nadatel N-0441U User Manual

o ALARM DURATION – 1 SECOND ~ 60 SECONDS (Allows the user to set ALARM-
OUT DURATION)
o ERROR ALARM – OFF, ALL, HDD ERROR, VIDEO LOSS (Allows the user to set
ERROR ALARM for SPECIFIC ERROR)
 CONTROLLER – Allows the user to select CONTROLLER protocol
o SPEED – Allows the user to select CONTROLLER SPEED
o ID – Allows the user to select CONTROLLER SPEED
 CAMERA PTZ – Allows the user to select PTZ CAMERA CHANNEL
o NAME – Allows the user to select PTZ protocol
o SPEED – Allows the user to set PTZ SPEED
o ID – Allows the user to select PTZ ID
 MOTION
o CHANNEL – CH 1 ~ 16 (Allows the user to select CHANNEL for MOTION setting)
o MOTION ZONE – FULL ZONE, PARTIAL ZONE (Allows the user to select MOTION
ZONE)
o MOTION SENSITIVITY – 1 ~ 9 (Allows the user to set MOTION SENSITIVITY)
 KEY TONE – OFF, ON (Allows the user to turn KEY TONE OFF or ON)
 REMOTE CONTROLLER ID – 00 ~ 99 (Allows the user to set REMOTE CONTROL ID)
 SENSOR – 1 ~ 4 (Allows the user to select SENSOR Number)
o TYPE – OFF, NORMAL OPEN, NORMAL CLOSE (Allows the user to set SENSOR
TYPE)

10-4. STORAGE

 OVERWRITE – ON, OFF (Allows the user to set OVERWRITE of the HDD ON or OFF)
 NOTE: Enabling OVERWRITE will allow the DVR to write over previously recorded
data, starting with the oldest date, when the HDD is FULL. If OVERWRITE is OFF, the
DVR will not record any new data once the HDD becomes full.
 RECORDING LIMIT – OFF, ON (Allows the user to set the RECORDING LIMIT)
94 | P a g e