Table of Contents
Advertisement
3-2. Setup – Display Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below. Navigate through
the menu items using the mouse or the control button (
of the menu item.
Item
OSD
Enable/disable on-screen-display.
OSD CONTRAST
Set the visibility level of the On Screen Display (OSD) (0~100)
SEQUENCE
Enable/disable sequential display of video in full screen mode.
SEQ-DWELL
Set the dwell time of each, quad or 9 channels display in sequential display mode. (3-
TIME
60seconds)
CHANNEL
Select a channel for applying the following settings using the mouse or control button on the
remote control. Press the right square button to change the setting value of all channels at
once. Press SEL button to change the setting value of all channels at once. Left click on the
mouse to highlight the setting and double-click if you want to change the value. Once the
value has been changed, select OK to confirm the changes.
(COVERT, BRIGHTNESS,CONTRAST,HUE,SATURATION)
28 |
P a g e
◀ ▲ ▶ ▼
Figure 3.2.1. Display Mode Setup Screen
Table 3.2.1. Menu Items in DISPLAY Mode Setup
) on the remote control and change the value
Description
Advertisement
Table of Contents
