Network - Nadatel N-0441U User Manual

10-6. NETWORK

 PORT – NETWORK PORT (Allows the user to change the DVR PORT)
 NOTE: The DEFAULT PORT is used as a primary port to create remote connections.
 WEBPORT – WEB PORT (Allows the user to change the WEB PORT)
 NETWORK TYPE – DHCP, LAN (Allows the user to select between DHCP and LAN
NETWORK TYPE)
o IP – Enter IP address if NETWORK TYPE is set to LAN.
o SUBNET MASK – Enter SUBNET MASK address if NETWORK TYPE is set to LAN.
o GATEWAY – Enter GATEWAY address if NETWORK TYPE is set to LAN.
ST DNS – Enter Primary DNS server address if NETWORK TYPE is set to LAN.
o 1
ND
DNS – Enter Secondary DNS server address if NETWORK TYPE is set to LAN.
o 2
 DDNS – OFF, ON (Allows the user to turn DDNS OFF OR ON)
o DDNS SERVER 1 NAME – Allows user to use the "microcamdns.com".
o DDNS SERVER 2 NAME – Allows the user to user a specific DDNS SERVER.
o DDNS SERVER 2 ID – Allows the user to enter specific DDNS ID.
o DDNS SERVER 2 PASSWORD – Allows the user to enter specific DDNS
PASSWORD.
o DDNS SERVER 2 INTERVAL – 5 MINUTES ~ 60 MINUTES (Allows the user to set
DDNS INTERVAL)
 NETWORK STREAM – Allows the user to set the following NETWORK STREAM settings;
RESOLUTION, FRAME RATE, QUALITY per CHANNEL.
97 | P a g e