Viewing the Picture from the System on
a Monitor or Projector
When the monitor or projector is connected to the Communication System,
you can view the picture from the system.
To connect a monitor or projector
to RGB
OUT
INPUT
PC/
RGB
VC
ENTER
MENU
To use the connected display equipment
When outputting the picture both to the monitor of the Communication System
and the display equipment connected to the RGB OUT connector, set "Monitor
Output" to "Dual" on the Basic Setup page of the Video setup menu (page 65).
For RGB output, you can select the video format of the signal output from the
RGB OUT connector with "RGB Monitor Output Format". You can select
"SXGA", "XGA" or "WXGA" (page 65).
160
Viewing the Picture from the System on a Monitor or Projector
Connecting cable with D-sub 15-pin
connectors
Monitor,
projector, etc.
to RGB IN