Sony IPELA PCS-XL55 Operating Instructions Manual page 110

When you do not want to answer the call
Press V, v, B or b to select "Cancel", then press the ENTER button. Ringing
stops, and the connection is canceled.
To answer a call in auto answer mode
When you receive a call, the Communication System rings and the message
"Answering..." appears on the monitor screen. The system is automatically
connected and the picture of the remote party is displayed on the local monitor
screen and the sound is heard. The picture and sound on the local site will be
enabled on the remote site at the same time.
The message "Session Connected." appears on the monitor screen.
You are now ready to start communication.
Note
See pages 123 to 131 to adjust the sound and picture during communication.
When the system fails to make an ISDN connection
If the system fails to connect to the remote party, the message "Cannot
complete connection. (an ISDN cause code and a message are displayed here)"
appears on the monitor screen.
For details on ISDN cause codes and messages, see "On-Screen Messages"
on page 222.
110
Receiving a Call from a Remote Party
Picture on the local site
Picture on the remote site