Sony IPELA PCS-XL55 Operating Instructions Manual page 78

if multiple passwords are registered. For
example, if the Phone Book Modification
Password, Save Settings Password, and
Administrator Password are registered, the
Administrator Password can be used to
modify Phone Books and settings.
Notes
• After you enter the Administrator Password to
modify settings or Phone Books, unless you
switch to a different screen from the setup
menu or Phone Book screen, modification will
be enabled without password reentry. In
addition, modification will be enabled without
password reentry for about 2 minutes after
returning to the Home menu from the setup
menu or Phone Book. The same applies when
you access the Administrator setup menu.
• Registering only the Administrator Password
will not enable password protection for
settings and Phone Book modification.
Always register the Phone Book Modification
Password and the Save Settings Password in
addition to the Administrator Password.
• Be aware that registering other passwords
but leaving the Administrator Password
blank allows for modification and
connection from the Web page without
password input.
• Make sure to write down the Administrator
Password. If you should forget the
Administrator Password, consult your Sony
dealer. In this case, the memory of the
Communication System is initialized before
repair, and the data in the Phone Book and
History lists, as well as various setting data,
are erased.
Phone Book Modification Password
Use up to 8 alphanumeric characters and
symbols to register the password used for
Phone Book modifications.
Note
After you enter the Phone Book Modification
Password to modify Phone Books, unless you
switch to a different screen from the Phone
Book, modification will be enabled without
password reentry. In addition, modification
will be enabled without password reentry for
about 2 minutes after returning to the Home
menu from the Phone Book.
78
Registering Local Information
Save Settings Password
Use up to 8 alphanumeric characters and
symbols to register the password used for
saving settings.
Note
After you enter the Save Settings Password to
modify settings, unless you switch to a different
screen from the setup menu, modification will be
enabled without password reentry. In addition,
modification will be enabled without password
reentry for about 2 minutes after returning to the
Home menu from the setup menu.
Remote Access Password
Use up to 8 alphanumeric characters and
symbols to register the password used for
accessing the Web page.
Streaming Broadcast Password
Use up to 8 alphanumeric characters and
symbols to register the password used when
receiving and viewing video and audio
streams from PCS terminals on the Web page.
Administrator2
Setup Password1
Allows you to select whether to require "Save
Settings Password" when saving each setting.
Line Interface
Enabled: Requires "Save Settings
Password" when saving the Line
Interface settings.
Disabled: Does not require the password
when saving the Line Interface settings.
Dial
Enabled: Requires "Save Settings Password"
when saving the Dial setup settings.
Disabled: Does not require the password
when saving the Dial setup settings.
Answer
Enabled: Requires "Save Settings Password"
when saving the Answer setup settings.
Disabled: Does not require the password
when saving the Answer setup settings.
Multipoint
Enabled: Requires "Save Settings Password"
when saving the Multipoint settings.