Sony IPELA PCS-XL55 Operating Instructions Manual page 106

2
Select the line interface to be used for connection.
Use the V, v, B or b button to select "Line I/F", then press the ENTER
button. The setting items appear. Press the V, v, B or b button to select the
line interface to be used to connect to the remote party, then press the
ENTER button.
IP: Connects to a remote party via a LAN connected to the
connector.
ISDN: Connects to a remote party via an ISDN.
ISDN (2B): Connects to the H.221-format system via 2B channels of the
ISDN connection.
TEL: Connects to the phone of a remote party to conduct a voice meeting
via the ISDN connection.
Note
When a checkmark is put to "SIP" under "Line Interface" of the Line Interface setup
menu, you can select "SIP" from "Line I/F".
3
Configure the LAN or ISDN line to be used for connection.
When using the LAN
1 Enter the IP address of a remote party to connect in the IP text box.
Use the V, v, B or b button on the Remote Commander to select the IP
text box, then press the ENTER button. Next, enter the IP address with
the number buttons on the Remote Commander or the on-screen
keyboard, and press the ENTER button.
Enter the host name and domain name (ex. host.domain) when using
the DNS server, or enter the party's user name and user number
registered in the LAN setup menu on the remote party's system when
using the gatekeeper, then press the ENTER button.
• When "Internet Protocol" is set to "IPv4" in the Administrator setup menu,
• When "Internet Protocol" is set to "IPv6" or "IPv4/IPv6" in the
• To delete the last entered character, use the BACK SPACE button on the
• To delete the entered IP address, use the RETURN button on the Remote
2 Select the communication bit rate.
Use the V, v, B or b button to select "Communication Bit Rate", then
press the ENTER button. Press the V, v, B or b button to select the
communication bit rate from the displayed submenu, then press the
ENTER button.
106
Starting a Connection by Calling a Remote Party
Notes
you can enter a dot (.) with the b or DOT button.
Administrator setup menu, you can enter a colon (:) with the b or DOT
button.
When "IPv4/IPv6" is specified, only colons can be entered with the b button.
When "IPv4/IPv6" is specified and you are calling using IPv4, press the DOT
button twice to enter a dot.
Remote Commander or "Back Space" on the on-screen keyboard.
Commander or "Cancel" on the on-screen keyboard.
(LAN)