To use the connected microphones
Set "Audio Input" to "MIC" on the Basic Setup1 page of the Audio setup
menu, and set "Input Select (MIC)" to "MIC (A1/A3)" (page 62).
To input the stereo sound from two microphones, set "Input Mode" to "Stereo"
(page 63). Set it to "Monaural" to input monaural sound from two
microphones.
Notes on installation of the microphones
• Install microphone about 50 cm (1.6 ft) away from the participants.
• Place the microphone in a quiet, echo-free location.
• Install microphones away from equipment that may cause noise.
• Avoid covering the microphones, with paper for example, or carrying the
microphones and moving them. If you do either, extreme noise and echo may
be heard temporarily by the remote party. In this case, wait until the echo
disappears.
• When stereo sound is input, locate the microphone connected to the MIC
(A1/A3) 1 (R) jack on the right of the camera and the microphone connected
to the MIC (A1/A3) 2 (L) jack on the left.
Using External Microphones and Headphones
155