Sony IPELA PCS-XL55 Operating Instructions Manual page 63

MIC+AUX: Inputs audio from the
microphone and auxiliary external
equipment.
Note
When "Link to Audio Input" is set to "On" in
the Video setup menu, "Audio Input", "Input
Select (MIC)" and "Input Select (AUX)"
cannot be selected.
Input Select (MIC)/
Input Select (AUX)
Allows you to select the microphone and/or
external equipment from which an audio
signal is input.
The options that can be selected vary with
the Audio Input setting.
When you select "MIC", you can select one
of the following three options. When you
select "AUX", "AUDIO" is selected. When
you select "MIC+AUX", you can select the
"MIC (Camera)" or "MIC (A1/A3)" option
for MIC, and "AUDIO" is selected for AUX.
MIC (Camera): Select to use the
microphone that is built into the camera
portion of the system.
MIC (A1/A3): Select use of the PCS-A1
microphone (not supplied) or PCSA-A3
microphone (not supplied) connected to
the MIC (A1/A3) jacks on the
Communication System.
AUDIO: Select to input the audio of
external equipment connected to the
AUDIO IN jack on the Communication
System.
Echo Canceller
Allows you to select whether to use the
internal echo canceller.
On: Enables the internal echo canceller.
Off: Disables the internal echo canceller.
Note
When "Audio Input" is set to "AUX", the echo
canceller will not function.
Lip Sync
Allows you to select whether to use the
function.
Sync
Auto: Enables the Lip Sync function.
Off: Disables the Lip Sync function.
Notes
• When "Adaptive Rate Control (ARC)",
"Packet Resend Request (ARQ)" or
"Forward Error Correction (FEC)" is set to
"On" in the QoS setup menu, you cannot set
"Lip Sync" to "Off".
• When "Lip Sync" is set to "Off", you cannot
change the setting for "Adaptive Rate
Control (ARC)", "Packet Resend Request
(ARQ)" or "Forward Error Correction
(FEC)" in the QoS setup menu.
Recording Mute
When you connect an audio recording
device to the AUDIO IN and REC OUT
jacks to record audio, this function reduces
oscillations in sound that occur due to loop-
back within audio recording device.
Off: Disables the recording mute function.
On: Enables the recording mute function.
Notes
• When "Recording Mute" is set to "On", only
signals from external equipment are affected.
Signals from the microphones or remote sites
are not affected. Therefore, the Recording
Mute functions only when "Audio Input" is
set to "AUX" or "MIC+AUX."
• When connecting an audio recording device
to the AUDIO IN and REC OUT jacks, set
"Recording Mute" to "On" and record the
sound only from the audio recording device.
If you want to record the sound on your site
as well, also use the microphone input.
Input Mode
Allows you to select the input audio mode.
Stereo: Inputs audio to the R/L jacks of the
audio input as stereo left and right
sounds.
Monaural: Inputs audio to the R/L jacks of
the audio input as monaural sound.
Output Mode
Allows you to select the output audio mode.
Stereo: Outputs audio from the system's
speakers or from the
as left/right stereo sound.
Lip
Monaural: Outputs audio from the system's
speakers or from the
as two-channel monaural sound.
Registering Local Information
(headphone) jack
(headphone) jack
63