Calling A Remote Party By Entering Their Address Or Number Directly; (Direct Dial) - Sony IPELA PCS-XL55 Operating Instructions Manual

.
Calling a Remote Party by Entering Their Address or Number
Directly (Direct Dial)
When "Direct Dial" is set to "On" in the Home Menu setup menu, the number
input box, Dial button, etc. are displayed in the Home menu, allowing you to
use the direct dial function.
AAA
Home
1
Use the V, v, B or b button on the Remote Commander to select
in the Home menu, then press the ENTER button.
F"
2
Use the V, v, B or b button on the Remote Commander to select the line
interface to be used, then press the ENTER button.
IP: Connects to the system on the remote site via a LAN connected to the
ISDN: Connects to the system on the remote site via an ISDN line.
TEL: Connects to a phone on the remote site via an ISDN line for a voice
meeting.
Note
When a checkmark is put to "SIP" under "Line Interface" of the Line Interface setup
menu, you can select "SIP" from the line interface select box.
3
Use the V, v, B or b button on the Remote Commander to select the
number input box, then press the ENTER button.
4
Enter the remote party's IP address or line number with the number buttons
on the Remote Commander, then press the ENTER button.
Note
The format of the address for a SIP connection is the following:
• 4000 (number assigned by the SIP server)
• 4000@sip.com
• 192.168.1.1 (when the IP address and SIP server are not used)
100
Starting a Connection by Calling a Remote Party
IP:XXX.XXX.XXX.XXX
IP
Line interface
Number input box
(LAN) connector.
Ready to connect. 5/11/2008 13:00
Ready
Dial
Dial
"Line I/