Machine Information; Peripheral Status; Communication Mode Status - Sony IPELA PCS-XL55 Operating Instructions Manual

Machine Information

The Machine Information menu shows the
versions of the HD Visual Communication
System and the connected equipment for
exclusive use, installed software versions,
etc.
Host Version
Displays the software version of the HD
Visual Communication System.
Software Option
Displays the optional software installed.
None: No software is installed.
Presentation: The Communication System
is equipped with the HD Data Solution
software preinstalled.
Multipoint: The Communication System is
equipped with the HD MCU software
preinstalled.
Option I/F
Displays the optional connected equipment.
None: No optional equipment is connected.
ISDN (B768): The PCSA-B768S ISDN
Unit is connected.
ISDN (B384): The PCSA-B384S ISDN
Unit is connected.
Tablet: Pen tablet (Bamboo small CTH-
470/K0 manufactured by Wacom Co.,
Ltd.) is connected.
Host Name
Displays the host name.
IP Address
Displays the IP address for LAN.
Note
When "Internet Protocol" is set to "IPv4/IPv6"
in the Administrator setup menu, both IPv4 and
IPv6 IP addresses are displayed.
MAC Address
Displays the MAC address for LAN.
Serial Number
Displays the serial number.
Machine version
Selecting "Next" in the Machine
Information menu shows the codec version,
etc.

Peripheral Status

Video Input
Displays the input video name.
Audio Input (MIC)
Displays microphone input name.
Audio Input (AUX)
Displays the external audio input name.
Video Output
Displays the video output size and the
50 Hz/60 Hz setting of "Frequency".
Audio Output
Displays the audio output equipped with this
system.
LAN Mode
Displays the LAN Mode for LAN.
Gatekeeper
Displays the status of registration to
gatekeeper with the following messages:
Gatekeeper Requested, Gatekeeper
Confirmed, Gatekeeper Reject, Registration
Requested, Registration Confirmed,
Registration Failed, Registration Rejected,
Registration Timeout, Unregistration
Requested and Unregistration Confirmed.

Communication Mode Status

The Communication Mode Status menu
shows the status of current communication
when communication is in progress, and the
status of previous communications when
communication is not in progress.
The ISDN Line Status, LAN Line Status or
LAN Connection Status will also be
displayed depending on the line interface
used.
Displaying the Machine Status
85