Sony IPELA PCS-XL55 Operating Instructions Manual page 35

When the camera is turned off, the Home menu appears as follows.
AAA
Home
Camera
Connect
Notes
• If a conference is conducted with the lens cover closed, only a black screen will be
visible to the remote party.
• If no communication exists and Remote Commander operations are not performed for
10 minutes, the camera will be turned off automatically.
• If Remote Commander operations are performed while the camera is turned off, the
camera will turn on.
For details on the Home menu, see "Identifying the Home Menu" on page 42.
Notes
• When you turn on the power of the Communication System for the first time after
installation, the setup wizard will appear after the self-diagnosis is completed. Set up
your system following the wizard.
For setups using the wizard, see "Setting Up the System Immediately after
the Installation — Initial Setup Wizard" on page 39.
• When used with an optional device especially designed for use with this system, such
as the ISDN Unit, for the first time, the Communication System may automatically
upgrade the software of the connected device. Upgrade the software according to the
message displayed on the monitor screen. Be sure not to turn off the Communication
System or disconnect the cable during upgrading. Otherwise, it may cause a
malfunction of the system. System malfunction may also occur when a system power-
off has been caused by an accidental problem such as a power interruption during
upgrading. If connection of the ISDN Unit or other devices to the Communication
System is not re-established even after the system power is recovered, consult a Sony
dealer.
• You can check the versions of the Communication System, optional dedicated
equipment connected and the application software installed using the Machine Status
menu.
For details on the Machine Status menu, see page 83.
IP:XXX.XXX.XXX.XXX
Ready to connect.
Ready 5/11/2008 13:00
Turning the System On/Off
35