Enter Programming Mode - ✱✱✱
From the Crown Jewel Keypad
1. Press
2. Enter the (6) six-digit password. The default is
From the Residence Telephone
1. When you hear a dial tone, press
1A.
If multiple Crown Jewel units are sharing the same phone line, then a Unit ID Code (1-7) MUST
be entered at this time.
NOTE: The default setting for each Crown Jewel unit is Unit #1. See page 27 for more information about
Multiple Unit Sites.
2. Enter the (6) six-digit password. The default is
The unit will emit a high-pitched tone.
3. Press
and the tone will stop.
Single Unit
Example:
Multi-Unit
Example:
Unit #4 (Data field "1A" specifies unit to be programmed) is ready to accept programming instructions.
From a Remote Telephone
1. Dial the residence telephone number
NOTE: If the Crown Jewel unit and an answering machine (or answering service) utilize the same telephone line, let the
line ring at least (2) two times, hang-up and call back within (1) one minute. The Crown Jewel unit will answer on the
second call. If the unit does not answer, you may need to change the ring count (see Set Visitor Ring Sound on page 18.)
When the Crown Jewel picks up the call, you will hear 2 short beeps
2. Press
2A.
If multiple Crown Jewel units are sharing the same phone line, then a Unit ID Code (1-7) MUST
be entered at this time. (See page 27 for more information about Multiple Unit Sites).
3. Enter the (6) six-digit password. The default is
The unit will emit a high-pitched tone.
4. Press
and the tone will stop.
Single Unit
Example:
Multi-Unit
Example:
Unit #4 (Data field "2A" specifies unit to be programmed) is ready to accept programming instructions.
The unit is now ready to accept programming instructions.
The unit is now ready to accept programming instructions.
1
Unit is ready to accept programming instructions.
1
1A
The unit is now ready to accept programming instructions.
1
Unit is ready to accept programming instructions.
1
2
2
2
3
2
2A
PAGE 5
2 Short Beeps
High pitch
tone stops.
High pitch
tone stops.
High pitch
tone stops.
High pitch
tone stops.
3
Need help?
Do you have a question about the Sentex Crown Jewel and is the answer not in the manual?