Delete Auto Unlock Schedule; Enable/Disable Auto Unlock Schedule - Sentex Crown Jewel Programming Manual

Delete Auto Unlock Schedules- 41 & 42
1. Press
2. Enter Days of the Week:
1 = Sunday
2 = Monday
3 = Tuesday
4 = Wednesday
3. Enter Segment (1-digit; 1 or 2)
4. Enter "99"
5. Press
EXAMPLE:
1
Deletes Thursday Unlock Schedule Segment #1 for Relay #1
1. Press
2. Enter Days of the Week:
1 = Sunday
2 = Monday
3 = Tuesday
4 = Wednesday
3. Enter Segment (1-digit; 1 or 2)
4. Enter "99"
5. Press
EXAMPLE:
1
Deletes Monday Unlock Schedule Segment #1 for Relay #2
Enable/Disable Auto Unlock Schedules- 40
FACTORY SETTING: Disabled
1. Press
2. Enter Unlock Schedule Mode (0-1)
0 = Disable Unlock Schedules
1 = Enable Unlock Schedules
3. Press
EXAMPLE:
1
Enables Unlock Schedules
IMPORTANT NOTES: If you make an error during an entry, press the asterisk key ( ✱ ) to begin again.
The pound key (#) MUST be used to SAVE the data at the end of each programming step.
Time MUST be entered using a 24-Hour format (8:00 AM = 0800, 3:00 PM = 1500 etc.)
2 Short Beeps: Programming input is valid 1 Long Beep: Input is not valid.
5 = Thursday
6 = Friday
7 = Saturday
8 = Holiday
2 3 4
5 = Thursday
6 = Friday
7 = Saturday
8 = Holiday
2 3 4
3 5
PAGE 15
5
5