Visitor Calls To Other Tenants (Dialing Codes); Set Maximum Number Of Digits Visitor May Dial - Sentex Crown Jewel Programming Manual

Visitor Calls to Other Tenants (Dialing Codes) - 19

This feature allows a visitor to place a call to a location other than the main residence by pressing 1#, 2# or 3# on the
Crown Jewel keypad.
1. Press
2. Enter Dialing Code Number (1-3)
3. Enter Telephone Number Crown Jewel will dial (up to 12 digits)
4. Press
EXAMPLE:
1
Sets Dialing Code #2 to dial 555-1234 when #2 is press on the Crown Jewel Keypad.

Set Maximum Number of Digits Visitor May Dial - 17

Program the maximum number of digits a visitor may enter on the unit's keypad after the visitor call has been answered.
FACTORY SETTING: 0 (Disabled)
1. Press
2. Enter the Maximum Number of Digits the Visitor may dial (0-6 digits; 0 = Disabled)
3. Press
EXAMPLE:
1
Sets the Maximum Number of Digits in the Extension Number to 4-Digits.
2
2 3
PAGE 20
3 4