Switches; Alarm Lamps - Hyundai Seasall S250S Installation & Operation Manual

INSTALLATION & OPERATION MANUAL

1.2 SWITCHES

1) Buzzer Reset Switch - This switch is used for turning off the alarm temporarily.
2) Dimmer Switch - This switch is used for controlling brightness of the other gauges
connected to the EOI.
3) Function Switch - This switch is used for changing the information display on the LCD.

1.3 ALARM LAMPS

S250 and S220 Series Engines
- 43 -
ENGINE OIL LAMP
• This lamp informs you that the engine
oil pressure is low.
If this lamp is on, you should stop the
engine and check the oil level with the
oil dipstick. If the oil is low, refill it. If
you refill the oil and the lamp still does
not turn off, you should not use your
engine and you should ask your local
service shop for maintenance.
CHECK ENGINE LAMP
• This lamp informs you that the engine
has a serious problem.
• You can see the DTC on the LCD of
the EOI .
• It is possible to drive at limited rpm.
The ECU will control the functions to
protect the engine.
immediately have the engine checked
at the nearest service shop.
You should