Hyundai Seasall S250S Installation & Operation Manual page 41

INSTALLATION & OPERATION MANUAL
1.1 GAUGE PANEL (Option)
RPM Gauge
Coolant Temperature Gauge
Battery Voltmeter Gauge
Ignition Key switch
NOTE: Gauge panel (show above) is not standard but available as an option
1.2 COOLANT TEMPERATURE GAUGE
1) This gauge will work when the key is in the
"ON" position.
2) Avoid max. rpm and WOT (Wide Open
Throttle) before a cold engine is fully
warmed up as it can harm the engine.
3) The gauge needle should be in proper range.
If the outside temperature is high, the gauge
needle may sit at a higher range. As long as
the alarm doesn't sound, the engine is
normal.
4) If the gauge blinks and an alarm sounds in the EOI, check the coolant temperature and
level. If the coolant is low, refill it.
5) If the temperature of the engine coolant is higher than 105℃, the engine power will
decrease. You should check the engine cooling system.
S250 and S220 Series Engines
204
- 40 -
136
Ø 5