Switches; Pto Mode; Idle Setting Mode - Hyundai Seasall G7 Series Installation & Operation Manual

SWITCHES

1) Function switch - use to change the information display on the LCD.
2) PTO / IDLE change switch – use to enable PTO / IDLE RPM adjustment function
3) UP / DOWN switch – use to raise or lower PTO / IDLE RPM.

PTO MODE

1) Used to adjust the fixed RPM of PTO.
2) When PTO switch is ON, engine speed will be upgraded 700RPM (initial RPM) .
3) You can adjust the RPM using the UP / DOWN switch.
4) When PTO switch is OFF, engine speed will be returned to the value set for IDLE RPM.
5) Adjustable RPM area : 700 RPM ~ 1900 RPM

IDLE SETTING MODE

1) Used to adjust the IDLE RPM.
2) When the switch moved to the UP or DOWN position, RPM value increases or decreases
by increments
INSTALLATION & OPERATION MANUAL
G7 Series
- 50 -