Switches; Alarm Lamps - Hyundai Seasall S270S Series Installation & Operation Manual

INSTALLATION & OPERATION MANUAL

1.2 SWITCHES

• Buzzer Reset Switch - This switch is used for turning off the alarm temporarily.
• Dimmer Switch - This switch is used for controlling brightness of the other gauges
connected to the EOI.
• Function Switch - This switch is used for changing the information display on the LCD.

1.3 ALARM LAMPS

Alarm may sound when alarm lamps flicker.
CHECK ENGINE LAMP
• This lamp informs you that the engine
has a serious problem.
• You can see the DTC on the LCD of the
EOI.
• It may be possible to drive at limited rpm.
The ECU will control the functions to
protect the
immediately have the engine checked at
the nearest service shop.
ALTERNATOR LAMP
• This lamp informs you to recharge your
battery.
• If this lamp is turned on, you should stop
the engine and eliminate electric load, as
well as check the alternator, alternator
drive belt and wiring system.
S270 Series Engines
engine. You should
ENGINE OIL LAMP
• This lamp informs you of the engine oil
pressure low.
• If this lamp is on, you should stop the
engine and check the oil level with oil
gauge. If the oil is low, refill it. If you
refill the oil and the lamp still does not
turn off, you should ask your local
service shop for maintenance.
WATER SENSOR LAMP
• This lamp informs you to extract water
from fuel filter.
• If the lamp is on, you should stop the
engine immediately and drain the
water in the fuel filter.
• It is recommended to check and drain
the water in the fuel filter at regular
periods before the lamp turns on.
• It can be harmful to drive your engine
with this lamp on.
- 46 -