Switches; Alarm Lamps - Hyundai Seasall D170 Series Installation And Operating Manual

INSTALLATION & OPERATION MANUAL

1.2 SWITCHES

1) Buzzer Reset Switch - This switch is used for turning off the alarm temporarily.
2) Dimmer Switch - This switch is used for controlling brightness of the other gauges
connected to the EOI.
3) Function Switch - This switch is used for changing the information display on the LCD.

1.3 ALARM LAMPS

Alarm may sound when alarm lamps flicker.
WATER SENSOR LAMP
• This lamp informs you to extract water
from fuel filter.
• If the lamp is on, you should stop the
engine immediately and extract the water
in the fuel filter.
• It is recommended to check and extract
the water in the fuel filter at fixed periods
before the lamp turns on.
• It can be harmful to drive your engine
with this lamp on.
ALTERNATOR LAMP
• This lamp informs you to recharge your
battery.
• If this lamp turns on, you should stop the
engine and eliminate electric load, as
well as check the alternator, drive belt
system and wiring system.
D170 and D150 Series Engines
- 41 -
ENGINE OIL LAMP
• This lamp informs you that the engine
oil pressure.
If this lamp is on, you should stop the
engine and check the oil level with oil
gauge. If the oil is low, refill it. If you
refill the oil and the lamp still does not
turn off, you should ask your local
service shop for maintenance.
CHECK ENGINE LAMP
• This lamp informs you that the engine
has a serious problem.
• You can see the DTC on the LCD of
the EOI .
• It is possible to drive at limited rpm.
The ECU will control the functions to
protect the engine. You should check
the engine at the nearest service shop
immediately.