Bosch Carephone 62 User Manual page 30

30 en | Programming
You have also access to extended programming features:
In steps 121, 122, etc, select the activation start and end time
for each RF detector, in steps of 15 minutes.
In steps 201, 202, etc, select the custom alarm type for each
RF detector. It must be a 3-digit value from 0 to 999.
CAUTION!
Steps 201, 202, etc. must only be used in case of a transmitter
in BS8521 protocol! Otherwise, alarms will not be transmitted!
Select also the custom event handler:
–
–
–
In steps 251, 252, etc, select the location code for each RF
detector. Choose a number between 0 and 99 corresponding to
a location code as described in the BS8521 protocol.
CAUTION!
The setting use the custom alarm type and event handler and
steps 251, 252, etc. must only be used in case of a transmitter
in BS8521 protocol! Otherwise, alarms will not be transmitted!
F.01U.141.162 | V5 | 2014.09
emergency event (personal).
Choose this setting in the case of a person triggering the
alarm. Notice: this resets the activity monitor.
emergency event (environmental)
Choose this setting in the case of a non-personal event
triggering the alarm, such as a detector.
silent event, with the listen-in function. The alarm receiving
centre has the ability to control the speak/listen
connection.
User Manual
Carephone 62
Bosch Security Systems