Bosch Carephone 62 User Manual page 27

Carephone 62
70 Automatic test call interval
You can program the interval between automatic test calls from the
Carephone 62 to the monitoring centre in days. In addition, there is a test
call after power up or leaving programming mode, as well as a test call per
randomization.
– Select from 1 to 28 days.
– 0 = off
– Default value is 0.
71 Action button (S button)
The Action button can be configured differently according to your needs:
– 0 = off
– 1 = service button / direct call (e.g. service call to a monitoring centre
or direct call to a relative)
– 3 = activate relay output (e.g. a door opener)
– 4 = send a manual test call (by pressing at least 2 seconds on the
action button)
– Default value is 0.
72 Activate output
The Carephone 62 provides a potential-free relay output with a normally
open switch contact. The way the output reacts can be programmed.
– 0 = off
– 1 = speak / listen connection and repeated emergency call
– 3 = outgoing emergency call
– 4 = incoming call recognition
– 5 = wireless transmitter
– 6 = remote activation
– 7 = speak / listen connection
– 8 = pre-alarm
– 9 = pre-alarm and speak / listen connection
– Default value is 0.
Bosch Security Systems User Manual
Programming | en
F.01U.141.162 | V5 | 2014.09
27