Bosch Carephone 62 User Manual page 28

28 en | Programming
73 Assign input
The Carephone 62 provides external inputs. The function assigned can be
programmed:
– 0 = external activity monitor reset
– 1 = emergency call button
– 2 = service call
– 3 = external input
– 9 = fire alarm
– B = motion detection
– Default value is 0.
After your choice, the input can be chosen as a:
– 0 = normally open contact (closing)
– 1 = normally closed contact (opening)
74 Silent alarm
The Carephone 62 can send silent alarms. When this is activated, the
loudspeaker of the Carephone 62 is turned off. Only the microphone
remains active.
– 0 = off, 1 = on. Default value is 0.
75 Individual PIN code
The Carephone 62 is delivered with the factory setting 246810 for the PIN
code. It is recommended not to change this code. If you need to change
this code, take care to write it down to find it easily. The PIN code is reset
when resetting the unit to its factory settings.
77 Pre-alarm time
The pre-alarm time of the Carephone 62 can be programmed. This is the
time within which an emergency call that has been initiated can still be
stopped.
– Select a setting, in steps of 10 seconds, between 0 and 6.
– 0 = off, 1 = 10 s, 2 = 20 s, etc. Default value is 1.
F.01U.141.162 | V5 | 2014.09 User Manual
Carephone 62
Bosch Security Systems